Windows can recognize all hardware devices’ statuses in Device Manager. The status is just the current state of the hardware you are using on the computer. No matter the device is running properly or not, you can always access the Device Manager to check a device’s status.
When you doubt that there is something wrong with the device you are using or there is a yellow exclamation point near the device mark, you can just view a device’s status in Device Manager to find the exact problem.
Do you know how to check a device’s status in Windows? If you don’t know, you just come to the right place. In this post, we will show you how to view a device’s status in Device Manager. The whole process is very simple.
Windows Computer Management is a pack of Windows administrative tools Microsoft provides for users. You can use it to access to a series of administrative tools like Event Viewer, Task Scheduler, Device Manager, Disk Management, Services Manager, etc.
If you need to open Computer Management in Windows 10 to manage, monitor or optimize a computer system for better performance, security or other improvement, you can check the 9 ways below to easily open Windows 10 Computer Management.
While many users have turn to Windows 10, Windows 7 is still very popular among world-wide users. Hence, it is very important to have a good partition manager to manage hard drives in Windows 7. In today’s post, I want to introduce one of the best partition manager for Windows 7/8/10, both 32 bit and 64 bit.
Best Free Partition Manager Windows 7
When it comes to reliable free partition manager for Windows, MiniTool Partition Wizard is always the first one that comes to mind. This partition manager software is capable of doing a lot of things. For example, when your computer has “low disk space warning”, you can make use of the Extend Partition feature.
When you connect an external drive like an external hard drive, USB stick, memory card, SD card, etc. to your computer, the device will push the driver via the USB port or you can choose to manually install the device driver through an external medium.
After the device driver is successfully installed and loaded, the connection between your PC and the external drive is established, and you can use the device normally.
However, sometimes, you may find that you can’t use the external drive as normal without receiving any error message. In a situation like this, you can go to Device Manager to check the status of the device and find out what the problem is.
If everything is OK, the message in the Device status section is This device is working properly.
However, if there is a problem, you can find an error code in the Device status section in the Windows Device Manager.
Take the following Device Manager code 38 as an example. You can see that the Device status shows you the information on this error:
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)
The driver could not be loaded because a previous version of the driver is still in memory.
Top Reasons for Error Code 38 Windows 10
To help you better understand this Windows cannot load the device driver for this hardware code 38 error, we summarize some main causes as follows:
The hard disk is turned off when the computer is idle.
The USB drive is in trouble.
The USB controller driver is not installed correctly.
The USB controller driver is corrupted.
The USB controller driver is outdated.
The USB controller driver has interfered with some third-party programs & services.
And more….
Your computer hardware might encounter different kinds of issues. You only discover the issues when you want to use it. But, at first, you just see that the device is not working normally. But, you don’t know why the hardware can’t work.
In a situation like this, you can go to the Device Manager to check the status of the device and then you can see what happens to the device. If there is something wrong with the hardware, you will see an error message with an error code.
Here are some common error messages you may receive:
This device cannot start. (Code 10)
This device is disabled. (Code 22)
Windows cannot initialize the device driver for this hardware. (Code 37)
Windows has stopped this device because it has reported problems. (Code 43)
And more….
We have talked about the above error codes except error code 22. If you are bothered by code 37, code 43, or code 10, you can access the above pages to get the solutions. While, if you are facing error code 22, this article is helpful.
